Harman-Kardon HKTS 2 owner manual Mounting Options, Wall-Mounting

Page 7

Mounting Options

Wall-Mounting

Unscrew the bolt that attaches the black shelf stand to the bottom of the speaker. Store the stand and bolt in a safe place in case they are needed for a future installation.

Remove

Stand

15mm or 1/2"

Wall Plate

Mount the wall-bracket attachment plate on the wall in the desired location.

If possible, position the speakers so that the mounting screws (not included; use size #8) may be installed directly into a wooden wall stud.

 

Wires to Speaker

 

Terminal Cover

 

Wire

Overhead

From

Wall

View

Plate

The bracket has two openings on top: a round screw hole, and an arc-shaped opening in front of it. The speaker cable should be threaded through the arc-shaped opening, not the screw hole.

Attach the bracket to the wall plate by inserting the tab at the top of the attachment plate into the slot on top of the bracket and snapping the bracket onto the attachment plate.

Thread the cable through the round opening in the terminal cover, and then insert the speaker wires into the terminals on the underside of the speaker, remembering to observe the correct polarity (see page 8).

Place the terminal cover over the opening on the underside of the speaker so that it fits flush against the speaker and covers the terminals, with its round opening exposing the threaded insert. The bracket fits through the round open- ing in the terminal cover.

The wall-mounted speaker may be pivoted from side to side; however, the bracket is not designed to tilt up or down, and attempting to tilt it will damage the bracket and possibly the wall, which would not be covered by your warranty.

Wall

23mm or 3/4"

(M6–1.25P or 1/4"–20)

If that is not possible, use optional wall anchors that are rated to support at least twenty-five pounds. The customer is responsible for proper selection and use of mounting hardware, available through hardware stores, to properly and safely wall-mount the speakers.

Referring to the speaker connection instructions on pages 8 through 11, thread the appropriate speaker cable through the opening in the bottom of the attachment plate, and then through the back of the bracket as shown in the diagram.

Wall Bracket

Insert the supplied bracket bolt up through the bottom of the bracket and terminal cover, and screw it into the threaded insert on the under- side of the speaker. The bolt should be snug, but not so tight as to prevent the bracket from pivoting.

MOUNTING OPTIONS 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hkts 2 Home Theater & Music Speaker System Declaration of Conformity Table of ContentsIncluded Description and FeaturesIntroduction IntroductionRear Panel Connections Instead Subwoofer Speaker PlacementColor-Coding System Front SpeakersWall-Mounting Mounting Options+ terminal and black for the terminal Speaker ConnectionsFront Left Right Front LeftImportant Do not use the Sub Input on Front RightFront Right Dolby* Pro Logic* Non-Digital Speaker LevelOperation VolumeAdditional Bass Adjustments When the Sub InputIf there is low or no bass output TroubleshootingReview proper operation of your receiver/amplifier Check the Balance control on your receiver/amplifierSystem SpecificationsAmplifier Watts RMS Bass Woofer, bass-reflex enclosure Important Safety Instructions Harman Consumer Group International
Related manuals
Manual 12 pages 5.97 Kb

HKTS 2 specifications

The Harman-Kardon Home Theater System, specifically the HKTS 2, is designed for those seeking an immersive audio experience in the comfort of their own homes. This system perfectly blends style and performance, fulfilling the needs of both casual viewers and audiophiles alike. The HKTS 2 is engineered to deliver a stunning sound experience that enhances movies, music, and gaming.

One of the standout features of the HKTS 2 is its compact yet powerful satellite speakers. The system includes four satellite speakers that boast a sleek design and can be wall-mounted for added convenience. This not only saves space but also allows for optimal placement to achieve the best sound distribution throughout the room. The dedicated 100-watt powered subwoofer provides deep, rich bass to complement the crisp highs and mid-range tones of the satellite speakers.

The tower of power in this system comes with the Harman patented technologies such as the HARMAN Bass Boost, which ensures that the subwoofer fully captures low frequencies, providing an exhilarating and immersive audio experience. The HKTS 2 is also equipped with advanced signal processing that enhances audio performance, enabling users to enjoy clarity and detail in their audio playback.

Another noteworthy aspect of the HKTS 2 is its compatibility with various sound formats. The system supports Dolby Digital and DTS formats, which are essential for experiencing the full audio landscape of today's blockbuster films and thrilling video games. Additionally, the speaker configuration is designed to create a true 5.1 surround sound experience, immersing listeners in a three-dimensional soundstage.

Setup is a breeze with the HKTS 2. It comes with all necessary cables, including color-coded wiring for easy connections, making it straightforward even for those who may not be technically savvy. The system is also aesthetically pleasing, with a stylish finish that complements modern home décor.

In summary, the Harman-Kardon HKTS 2 Home Theater System brings cinematic sound quality into the home with its powerful subwoofer, sleek satellite speakers, and advanced audio technologies. Whether for movie nights, gaming marathons, or simply enjoying your favorite tunes, the HKTS 2 provides an exceptional auditory experience that makes every moment memorable.
Top Page Image Contents