FRONT-PANEL CONTROLS
3 4 5 6 7 8 9
DVD 25
1 | 2 |
Main Power On/Off
1Power On/Off (Standby)
2 Eject
3 Play
Main Power On/Off: Press this switch to apply power to the DVD 25. Once the unit has been turned on with this switch, it may be operated from either the front panel or remote control. Press the switch again to turn the unit completely off.
1Power On/Off (Standby): Press the Button once to turn the DVD 25 on. Press it again to put the unit in the Standby mode. Note that in order for this switch to
operate, the Main Power Switch must be pressed in so that it is in the ON position.
2Eject: Press this Button to open or close the Disc Tray.
3Play: Press to initiate playback or to resume playback after the Pause Button 4C has been pressed.
4Pause
5 Stop
6 Skip (Previous)
7 Skip (Next)
4Pause: Press this Button to momentarily pause playback. To resume playback, press the button again. If a DVD is playing, action will freeze and a still picture will be displayed when the button is pressed.
5Stop: Press this button once to place the disc in the Resume mode, which means that playback will stop, but as long as the tray is not opened or the disc changed, DVD playback will continue from the same point on the disc when the Play Button 3G is pressed again. Resume will also work if the unit was turned off. To stop a disc and have play start from the beginning, press the button twice.
6Skip (Previous): Press this button to move back- ward through the music tracks on a CD disc or the chapters on a DVD disc.
7Skip (Next): Press to move forward through the music tracks on a CD or the chapters on a DVD disc.
8Dimmer
9 Test
8Dimmer: Press this button to reduce the bright- ness of the Information Display by 50% or to turn the display off completely in the following order: FULL BRIGHTNESS ➔ HALF BRIGHTNESS ➔ OFF ➔ FULL BRIGHTNESS.
9Test: Press this button to bring a test picture to the screen, which enables you to optimally adjust all important parameters of color videos, such as bright- ness, contrast, color intensity and tint.