Zoom, Back-up, Video Clip | Q-See MODEL QC40196, MODEL QC40198

Zoom

In multi-screen playback, you may click on a channel to bring it to full-screen view. Double- clicking the screen again will further enlarge the screen and remove the playback bar. Double- clicking a third time will return you to the multi-screen mode. You can also step backwards in

Back-up

Individual files recorded by the DVR can be backed up to an external USB device for playback on a computer.

the process by right-clicking.

At any time, you can zoom into a recording by clicking and dragging the mouse. This will draw a green-outlined rectangle on that screen and the cursor will change to a magnifying glass. Click within the area you’ve selected to zoom in, or click outside to dismiss or re-select the area.

PICTURE 4-14

In the case of a multi-screen viewing mode, the zoomed in section will fill only that portion of the screen occupied by that channel until you double-click on it at which time it will expand to fit the screen. Double-clicking again will further enlarge the view and remove the playback bar as above. Right-clicking the mouse will return you to your previous mode of viewing.

Video Clip

You must have a USB device connected to the USB port on the side of the monitor before proceeding.

STEP 1. In your file list to the right of the playback screen, check the box next to the file(s) you wish to save.

STEP 2. Select the BACKUP icon and the Backup window will open. Your device will be listed at the top of the window showing how much space is available. Below it, the list of file(s) you wish to back up will be displayed along with type, start and end times and size. At the bottom of the window, the space required to save the file(s) will be displayed. You may uncheck any files you do not wish to back up at this time. The Remove button will remove all the files from your list.

STEP 3. Press start to back up your selected files.

1p 2p 3p 4p

StartTime Type

11:37:22 M

11:48:00 R

11:54:00 A

12:10:00 M

13:00:00 R

14:00:00 R 15:00:00 R

16:00:00 R

PICTURE 4-16

CHAPTER 4 BASIC OPERATION

This allows you to save only a portion of a video clip. For example; if you have a camera set to record all the time and it captures some action in a five-minute segment, you can clip only that portion and back it up. In addition to making an incident readily available, saving only the portion of interest will reduce the amount of disk space needed to back it up.

STEP 1. Select a file to view in the normal manner.

STEP 2. Find the section of interest and press the Clip button

STEP 3. Drag the playback bar to the
end of the section and press the Clip
button again.	PICTURE 4-15
	PICTURE 4-15

STEP 4. Press the Backup button to save the file to a USB drive connected to the USB back-up port on the side of the DVR.

Right-clicking the mouse will exit this window without saving the files.

More information about backing up files – including backing up the entire hard drive – can be found in Section 4.9.

NOTE! The video files are in a proprietary format that will not play outside the DVR without being converted to .avi format using the included General Player software included on the Manuals and Software disc that came with this DVR or available for free download at Q-See.com by searching for your model number and looking under Software.

Right-clicking with the mouse will exit the playback window.