Wintal 720P, PVR2HD, 1080I manual Program Guide, Program Manage, Factory Default, Program Edit

Add (Red key) Delete (Green key) Modify (Yellow key)

Add

After pressing red key on your remote, the Add Channel window, where you can set necessary parameters of the new channel, will be displayed on the screen.

Frequency: You can input values referring to above by using the number keys on your remote.

Bandwidth: Press the ◄► keys to choice 6M, 7M or 8M.

After setting all the parameters, press the OK key to confirm and exit from the Add Channel window. In Channel Edit window, you can find that the new channel has been added to the end of the list.

Delete

This command allows you to delete one or more unwanted channels. Select the channel you want to delete and press the green key on your remote.

Note: After you choose to delete the channel (by pressing the green key), the system won’t ask you to confirm your deletion. So please make sure before you delete the channel.

Modify

Select the channel you want to edit first and then press the yellow key to display the “Modify Channel” window. The operations are the same as “Add”.

1.4 Factory Default

In Installation menu, move the selection to Factory Default and press the OK key, a warning message box will be displayed on the screen, press OK key to confirm your selection.

NOTE: After restoring default, all programs you have searched will be erased and all parameters will return to the factory default. Please use this operation with care.

2. Program Guide

NOTE: Pressing the EPG key on your remote will also enter the Program Guide window directly.

The left hand of this screen displays the available channels. You can see a preview of the channel and the EPG information on the right hand side.

Press the “Recall” key to switch between several days of EPG for that channel. Press the FAV key to change the group.

Press the Green colour key to enter into the program schedule window. Press the EXIT key to return to main menu.

Note: EPG information is entirely based on what the broadcaster chooses to broadcast. And may not necessarily be accurate.

3. Program Manage

3.1 Program Edit

Through this window, you can edit programs according to your requirements. The three colour keys on your remote have the following functions.

Delete (Red key)    Move (Green key)    Rename (Blue key)

Delete

Delete allows you to delete one or more unwanted programs permanently. First select the program you want to delete and press the red key on your remote.

You can continue to select other unnecessary programs and mark them (shown with a red

16 17