Premier Mounts INW-series, INW-50, INW-60, INW-42 installation manual

Page 2

The wall structure should be capable of supporting a weight of at least five (5) times the display’s weight. If it cannot the wall must be reinforced. Proper installation procedure by qualified personnel as outlined in the installations instructions must be adhered to. Failure to do so could result in serious personal injury.

WARNING: Safety precaution measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury.

The entire installation instructions should be fully read and understood, including all of the safety symbols and safety precautions, before beginning installation. The installation instructions should be read, understood and followed to prevent personal injury or property damage. Keep these installation instructions in an easily accessible location for future reference.

Indicates that the power plug is to be disconnected from the power outlet.

Safety precautions must be taken at all times.

Warning and caution in general

Contact Premier Mounts for any questions

A secured structure wooden stud wall must always support the weight or load of the display. Always confirm the wood stud before beginning the installation.

Do not install in locations where there is vibration, movement or danger of impact. Failure to do so could result in display cracking or falling from the wall causing damage and injury.

Do not install near heater, fireplace, direct sunlight or air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the display and could cause a risk of fire.

At least two qualified people should always perform the installation work. Injury and damage can result from dropping or mishandling the display.

- 2 -

Image 2
Contents Inwall mount Page Assembly drawing Parts list Opening the wall structure INW42 SeriesStep Plenum 10/32 Hex Nuts