Step | Premier Mounts INW-series, INW-50, INW-60, INW-42 instruction

Step 2

Partial “knock outs” are incorporated in the top and upper back on both sides of the base pan for bringing power and signal cables into the pan in accordance with code. Insert the pan fully (in the case of a standard 2 x 4-stud wall) or to the desired depth in a deeper wall structure. Secure the pan to the wood stud frame using nails or wood screws (commercially available). See figure 2.

NOTE: A standard “handy box” extension ring can mount directly to the inside of the pan at the knock out points to provide an A/C power duplex outlet mounting point.

Figure 2

Mounting studs

for the fan bracket

Cable access

hole

Nails or wood

screws

Wood stud

frame

Plenum

Step 3

Install the muffin fan to the mounting bracket (refer to the muffin fan manual for air flow position). Secure the muffin fan with the four (4) 6/32” hex nuts and Phillips screws (supplied) See figure 3.

Figure 3

(4) 6/32” Hex nuts	Muffin fan mounting
	bracket
Muffin fan	(4) 6/32”x 2”
	Phillips screws

- 6 -