Mounting Bracket
| C |
|
| L |
|
|
| Bottom of Flat |
|
| Panel |
|
| Center of |
|
| Viewing Guide |
Align the Mounting | Bottom of the | Center of Flat |
Flat Panel | Panel | |
Brackets | Figure 8 | Figure 9 |
|
7.The Griplates™ have M4, M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires. EXAMPLE: If your plasma uses M8 x 20 Phillip screws. Use the M8 mounting points (Figure 10).
8.Once the mounting brackets are aligned secure the Griplate™ to the flat panel. Use (1) Griplate™ per mounting point (Figure 11).
NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down.
Dimples Facing | Screw Driver |
Up |
|
DIMPLES
FACING UP
DIMPLES
FACING UP
DIMPLES
FACING DOWN
Bottom of Flat Panel
M4 | M5 | M6 | M8 |
DIMPLES
FACING DOWN
Figure 10 | Figure 11 |
|
|
Installation Manual | Page - 11 - |