Philips FW-C355 Maintenance, To deactivate the sleep timer, Cleaning the Cabinet, Cleaning Discs

Page 26

Clock/Timer

E n g l i s h

To check the remaining length of time after sleep timer is activated

Press SLEEP once.

To change the preset sleep timer

Press SLEEP again while the remaining sleep timer is shown.

The display will show the next sleep timer options.

To deactivate the sleep timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Maintenance

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.

Do not use solvents such as benzene, thinner, commercially

available cleaners, or antistatic spray intended for analogue records.

Cleaning the disc lens

Cleaning the Heads and the Tape Paths

To ensure good recording and playback quality, clean the heads A , the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.

Use a cotton swab slightly moistened with cleaning fluid or alcohol.

You can also clean the heads by playing a cleaning tape once.

C B A B C

● After prolonged use, dirt or dust may

 

accumulate at the disc lens.To ensure good

Demagnetising the heads

playback quality, clean the disc lens with Philips

● Use a demagnetising tape available at your

CD Lens Cleaner or any commercially available

dealer.

cleaner. Follow the instructions supplied with

 

cleaner.

 

26

pg 001-029/C355/21-Eng

26

3139 115 21381

12/24/01, 11:18 AM

Image 26
Contents C355 México Pg 001-029/C355/21-Eng Pg 001-029/C355/21-Eng Index Contents General Information Supplied accessoriesSafety information Environmental informationRear connections Power AM AntennaPreparations Antennas ConnectionOptional connection Inserting batteries into the remote controlConnecting other equipment to your system FM AntennaRemote control Controls on the systemControls Basic Functions First time setup/power upTo reinstall Plug and Play Plug and PlaySwitching the system to standby mode Demonstration mode Dim modeSwitching the system on Volume controlROCK,TECHNO or Optimal Sound controlProviding the best music reproduction Dynamic Bass Boost DBBDiscs for playback CD OperationLoading discs ProceedingReplacing discs during playback Playing discsSelecting a desired track/passage Repeat and ShuffleRandom play Programming the disc tracksErasing the programme To review the programmePreset number Tuning to radio stations Storing preset radio stationsAutomatic Preset Programming Radio ReceptionChanging tuning grid not available for Tuning to preset radio stationsErasing a preset radio station Tape Operation / Recording Loading tapeGeneral information on recording Playing tapesRewinding / Fast forwarding To playback a selected tape deckDubbing tapes Preparation for recordingCD Synchronised start recording Listening to external sources External SourcesMicrophone mixing AUX is displayedClock setting Timer setting View clockTo exit without storing the setting Clock/TimerSleep timer setting Deactivating the timerCleaning the Cabinet MaintenanceTo deactivate the sleep timer Cleaning DiscsSpecifications CD Operation TroubleshootingProblem Solution Radio ReceptionGeneral