Philips FW-C355 manual General

			Troubleshooting
GENERAL
	The system does not react when	–	Remove and reconnect the AC power plug and
	buttons are pressed.		switch on the system again.
	Sound cannot be heard or is of poor	–	Adjust the volume.
	quality.	–	Disconnect the headphones.
		– Check that the speakers are connected correctly.
		– Check if the stripped speaker wire is clamped.
	The left and right sound outputs are	–	Check the speaker connections and location.
	reversed.
	The remote control does not function	–	Select the source (CD 1/2/3 or TUNER, for
	properly.		example) before pressing the function button
			(É,í,ë).
		– Reduce the distance between the remote
			control and the system.
		– Insert the batteries with their polarities
			(+/– signs) aligned as indicated.
		–	Replace the batteries.
		– Point the remote control directly towards the IR
			sensor .
	The timer is not working.	–	Set the clock correctly.
		– Press and hold CLOCK•TIMER to switch on the
			timer.
		– If recording or tape dubbing is in progress, stop
			recording.
	The Clock/Timer setting is erased.	–	Power has been interrupted or the power cord
			has been disconnected. Reset the clock/timer.
	The system displays features	–	Press and hold Çon the system to switch off
	automatically.		the demonstration.

E n g l i s h

29

pg 001-029/C355/21-Eng	29	3139 115 21381
		12/24/01, 11:18 AM