6.Replace the protective plate and tighten its thumb screws in order to mechanically secure the computer module.
Connector Panel & Interfaces
TouchMonitor & Computer Module Connections
1.Once the Computer Module has been installed, connect the AC power cable between the touchmonitor’s POWER IN connector and the AC power source.
2.Make any desired connections to the Computer Module connector panel.
3.Press and hold the touchmonitor’s power button for 4 seconds to turn on the Computer Module.
Note:
Once the Elo Computer Module is installed in the touchmonitor, the touchmonitor’s VGA & HDMI video and USB touch functions are disabled. All of the touchmonitor’s video and touch functionality is handled through the Computer Module docking connection.
User Manual – Interactive Digital Signage