| The monitor continually scans for active video from VGA, HDMI, and the Computer |
| Module. This adjustment selects which of those input ports should be given priority |
| to be displayed. |
Video Source | If there is no Computer Module plugged in, the options are: VGA Priority, HDMI |
Priority | |
| Default: HDMI Priority |
| When a Computer Module is plugged in, Computer Module HDMI is the only |
| displayable video source, and this adjustment is not available. |
| Selects which audio source is heard over the monitor’s speakers or headphone |
| output. |
| If there is no Computer Module plugged in, and the video source is HDMI, the options |
| are: Line In and HDMI. |
| Default: Line In. |
Audio Source | If there is no Computer Module plugged in, and the video source is VGA, the only |
| option is Line In. |
| If a Computer Module is plugged in (and therefore the input video is Computer Module |
| HDMI), the options are: Elo Computer Module HDMI, Elo Computer Module Line In, |
| and Line In. |
| Default: Elo Computer Module HDMI. |
| For situations in which multiple IDS+ECM Computer Module systems are |
| |
| master or one of the slaves of the |
ECM MDC | The options are: Master, Slave |
| |
| Default: Master |
| Note: This option only available when the ECM Computer Module is plugged in. |
All TouchMonitor adjustments made through the OSD are automatically memorized as soon as they are entered. This feature saves you from having to reset your choices every time the touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor settings will not default to the factory specifications.
User Manual – Interactive Digital Signage
SW601176 Rev D - Page 26 of 34