SunBriteTV 46-006-4660HD-111005, SB-4660HD-SL, SB-4660HD-BL manual Switching Sources for Ports

TV Installation – Rear Panel Connections

Switching Sources for Ports:

Model 4660HD offers several options when connecting your devices to the TV. The chart below will help you understand which source you switch to for each of the ports.

CONNECTING TO AN ANTENNA

Connecting to Digital Cable without Cable Box or Antenna:

Note: For ease of install, SunBriteTV has included a Push-on Coaxial Adapter.

1. Make sure the power to the TV is turned off.

2-a. Connect the Coaxial RF cable from your antenna or digital cable to the Push-on Coaxial Adapter that was shipped with the TV.

2-b. Slip on the Push-on Coaxial Adapter and Coax onto the NTSC/ATSC port on the back of the TV.

3.Turn on the TV.

4.Select TV Air/Cable in the Menu/TV /Tuner mode.

5.Use the On-Screen Display to scan for channels (Setup/ TV/Channel Scan)

Please Note :

1.Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.

2.The TV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your 4660HD might lose picture or sound.

SunBriteTV Model 4660HD Operator’s Manual Page 11