SunBriteTV SB-4660HD-BL, SB-4660HD-SL manual IR Emitter Installation, To install the IR Emitter

IR Emitter Installation

IR Window Tie-Down

To install the IR Emitter:

The photo to the right shows an IR Emitter* installed.

The end of the Emitter is to be mounted in front of the IR Emitter Window.

Place the emitter on the white tie-down block and use the tie-down to secure it in place.

Place the emitter cable over the right or left side of the cable box and connect the other end of the emitter to the appropriate control block*.

*Neither the emitter or control block are supplied by SunBriteTV. See instructions that come with your IR Emitter and control block to determine how to make the

connections.	Tie-Down Block	IR Emitter	Place IR Emitter Cable
			over right or left side of
			the cable box.

Page 42