BASIC OPERATIONS
To select input source, change channels, and adjust volume, use the TV remote control or the front panel controls.
Before using the LCD TV
Connect all external equipment properly.
Connect the power cord. The power LED indicator lights orange.
Turning the power on and off
Press POWER on the LCD TV or press POWER on the remote control. The power LED lights blue when the LCD TV is on.
Note: After a few seconds of idleness, the power LED lights orange when no signal is present.
Selecting the input source
Press the INPUT on the remote control, then use ▲▼ to select the input source. Item settings are: TV, AV,
To confirm the selection, press ENTER.
Adjusting the volume
Press – VOL +.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press – VOL +.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is in.)
* The picture here shows an example of the INFO screen in a DTV source.
10