Alpine TME-M580 owner manual Installation

Page 7

Installation

Caution:

Do not install the monitor near the front passenger seat air bag system. <Mount it using the supplied bracket>

1.Assemble the supplied bracket and mount the monitor temporarily. Note: Always use the supplied bracket or equivalent.

2.Verify the installation location.

Select a flat surface and temporarily mount the unit. Use adhesive tape, etc.

Notes:

¥Mounting hints

¥Top of the monitor should not exceed the top of the dash when viewed from the driverÕs seat.

¥Use a stable mounting surface.

¥Angle the monitor for easy viewing.

¥In a vehicle with a front passenger air bag, do not install the unit where it will interfere with the operation of the safety systems.

¥If the surface of the dash board is finished with other than plastic (leather, wooden panel, cloth covered panel, etc.), there will be some damage if the bracket is removed.

¥Installation close to other equipment (such as a GPS antenna) may give rise to mutual interference. Please pay careful attention to the installation location and maintain sufficient space between other equipment.

3.Remove the monitor from the bracket.

4.Peel the protective paper from the double-stick tape on the bracketÕs base.

Clean the mounting location with a suitable cleaner.

Notes:

¥Warm the mounting location with a dryer, etc. and then place the bracket into position.

¥Do not apply force or moisture for 24 hours after installation.

¥If the bracket is not attached securely with just the tape, use the supplied screws to complete the installation.

¥If the mounted surface is curved slightly, reform the base to fit to its shape.

5.Mount the monitor to the bracket.

Thread the mounting screw into hole at the bottom of the monitor. Secure the monitor by tightening the screw. Depending upon the location, the bracket can also be mounted using the supplied nut to slide into the back of the monitor. Thread the bracket mounting screw into the nut. Slide the nut in the channel on the back of the monitor and adjust the height and tighten.

Dress the monitorÕs cable using the cord clamp provided.

6.Adjust the height and angle of the monitor for easy visibility. Determine the height and angle. Tighten the height and angle adjusting screws to secure the monitor.

1

2

5

NOTE:

¥The A/V Interface box may be mounted in any suitable location. Make sure the box and the wires connected to it will not interfere with safely operating the vehicle.

¥Mounting the Interface box near the monitor will reduce the need for additional cable extensions.

¥This monitor can be mounted in a headrest if desired. A special mounting kit is required and can be purchased from your Authorized Alpine dealer. Ask for model KTE-580V.

Page 7

Image 7
Contents Alpine¨ Points to Observe for Safe Usage Points to Observe for Safe Usage PWR SEL Disp OperationReset the Monitor Settings Case of Difficulty Symptom Cause SolutionInstallation Connections SpecificationsPin Nav Cable included with Alpine Navigation systems TME-M580 + Video and NavigationNot Used To NAV To Brain TME-M580 + Navigation OnlyTME-M580 + Video Only Power Harness Color CodeAlpine¨

TME-M580 specifications

The Alpine TME-M580 is a cutting-edge multimedia receiver designed to enhance in-car entertainment while ensuring seamless connectivity and easy usability. With its sleek design and robust features, it appeals to a wide range of users, from casual listeners to audiophiles who value superior sound quality.

One of the standout features of the TME-M580 is its compatibility with both Apple CarPlay and Android Auto, allowing drivers to integrate their smartphones effortlessly. This feature provides access to navigation, music, messaging, and other apps right from the receiver's interface, ensuring that you can stay connected without compromising safety on the road.

The TME-M580 boasts a 7-inch touchscreen display that provides vibrant visuals and an intuitive user interface. The screen is designed for easy readability, even in bright sunlight, and provides clear access to all functionalities. The responsive touchscreen allows for quick navigation through menus, making it easy to change settings or select your favorite tunes without distraction.

Audio quality is a key focus of the TME-M580, which comes equipped with a 4-channel amplifier that delivers 50 watts per channel. This ensures that your music sounds rich and dynamic, whether you are listening to classical symphonies or the latest pop hits. The built-in equalizer offers customizable sound profiles so you can fine-tune the audio output to your preference.

In terms of connectivity, the Alpine TME-M580 features Bluetooth technology for hands-free calling and audio streaming. The Bluetooth capability allows for a wireless connection to your mobile devices, making it easy to enjoy your favorite playlists or podcasts while driving. Additionally, it includes USB and auxiliary inputs, providing versatile options for connecting various media sources.

The TME-M580 also supports FLAC files, allowing users to enjoy high-resolution music without loss of quality. This feature is especially appealing for those who prioritize audio fidelity, ensuring that every note and nuance is preserved in your music.

Installation is straightforward, thanks to the receiver's compact design, making it an excellent choice for a wide variety of vehicles. Its modern aesthetics and functionality make it adaptable to both contemporary and classic car interiors.

In summary, the Alpine TME-M580 represents a perfect blend of advanced technology, user-friendly features, and exceptional audio performance, making it a top choice for anyone looking to upgrade their in-car entertainment experience. With its rich connectivity options and high-quality sound, it's a device designed to bring joy to every drive.