Setting up TV Program
Once you have preset the program, you will be able to use the CHx/CHy or NUMBER buttons to scan the program you programmed.
Program can be tuned using Auto or Manual program menu.
Auto Program
All programs that can be received are stored by this method. It is recommended that you use Auto program during installation of this set.
1Press the MENU button.
2Select the Setup menu.
3Select the Auto Program menu.
4Select the CHxy button to select Table mode.
5Select a Table mode with the VOLÏq button.
V/UHF => Cable STD => Cable HRC => Cable IRC
6Select the Start menu to start Auto Program.
7Press the MENU button to stop Auto program.
8Press the TV/AV button to return to normal TV viewing.
TableV/UHF
START
20