DiBoss LT-40T6MVH, LT-40H6MVH manual Setup, Auto

Connectingti

thet PC as a monitorit r

Setup

This function is to adjust picture to left/right and up/down as you prefer.

1 Press the MENU button.

2 Select the Setup menu.

3Press the CHx/CHy button to select the desired item.

4Press the Ïq button to make desired adjustment.

5Press the TV/AV button to exit menu

H-Position (Horizontal Position)

This function is to adjust picture to left/right as you prefer.

V-Position(Vertical Position)

This function is to adjust picture to up/down as you prefer.

Phase

This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Clock

This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.

Note

This mediation range is different according to the supported resolution.

Reset

This function allows you to return to the good picture reproduction programed at the factory and cannot be changed.

Auto

This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the Auto-configuration is in process.

1 Press the MENU button.

2Press the CHx/CHy button to select the Auto. Then press the Ïq button.

Note

Some signal from some graphics boards may not function properly.

If the results are unsatisfactory, adjust your monitor’s position, clock and clock phase manually.

41