Element Electronics Flat Panel Television manual Channel List

Chapter 2 Installing the TV

Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select TV.

Press the ▼ button to select Channel Scan, and press the OK button.

The Channel Scan automatically creates a list of receivable channels. Press the MENU button at any time to interrupt the memorization process (The list will not be created if interrupted.)

The Channel Scan will create a list of receivable channels for the current input (antenna or cable). You will be required to run a Channel Scan for each RF input to create a list of available channels from both inputs.

8 Press the LIST button to display the received channel list. Then press ▲▼ to select a channel and press the OK button to display the channel detail.

Or, use the ▪ button) with 0-9buttons to select digital channel( for example 9.1)

The digital main channel might include many subchannels (for example 9-1, 9- 2..) that are showing program at the same time

ENGLISH