Setup menu operation – VGA menu options
VGA MENU OPTIONS
Continuously Press [INPUT] on the remote control until coming VGA on the
1.Use 
/ 
to select what you want to adjust in the FEATURE menu.
2.Press ENTER button to select it and then use 
/ 
to adjust.
3.When you are satisfied with your adjustment, press MENU to exit the main menu.
VGA Set
Press 
/ 
button and then press ENTER to enter the VGA set menu as below
zH-Position
Press ENTER button to select it and then use 
/ 
to adjust the horizontal position of the picture.
z
Press ENTER button to select it and then use 
/ 
to adjust the vertical position of the picture.
zPhase
Press ENTER button to select it and then use 
/ 
to adjust the phase of the picture.
zClock
Press ENTER button to select it and then use 
/ 
to adjust the clock of the picture.
Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal
25