Element Electronics ELCFT241 manual Troubleshooting, Symptom Possible Cause Remedy

Troubleshooting

If your television does not operate normally or does not turn on, please check the following troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact technical support (refer to Warranty page).

SYMPTOM	POSSIBLE CAUSE	REMEDY
Dead. No LED lit	No power to the TV.	Check all connections to the TV’s AC socket.
Dead. No LED lit orange	Set in standby mode.	Press either the Power button or the Standby button
		on the remote control.
	No signal.
Blue screen		Press INPUT button to select the correct source
	Incorrect source selected.
Noisy, snowy, ghosting	Poor antenna signal.	If using an indoor antenna, try adjusting the antenna
		postion. Check antenna connections
picture (TV)
	Sound “Mute”.	Turn sound “Mute” OFF.
No sound	Volume set too low.	Check volume settings.
	External leads not connected	Check that all external leads are connected properly.
	“if used”.

24