Troubleshooting
NOTE: When there is a problem in VGA mode (only when VGA mode is applied)
PROBLEM | POSSIBLE SOLUTION |
|
|
The signal is out of range | - Adjust resolution, horizontal frequency, or vertical |
| frequency |
| - Check whether the signal cable is connected or loose |
| - Check the input source |
|
|
Vertical bar or stripe on background, horizontal noise and | Set the auto configure or adjust clock, phase or H/V |
incorrect position | position |
|
|
Screen Color is unstable or is a single Color | - Check the signal cable |
| - |
|
|
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the screen
1.A great tip to dust off your screen. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the screen.
2.Make sure the excess water is off the screen, then let
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it is a good idea to unplug the power cord to protect against possible damages from lightning or power surges.
26