Troubleshooting

	Symptom		Check Items
1.	No picture	1.	Check if the monitor is turned on (press the button	again).
2.	LED indicator (at the right side	2.	Check if the power cord is properly connected to the monitor
	of the monitor) is not lit		and power outlet.

3.Check if there is electricity coming from the power outlet (use another device to check for power).

1.	No picture		1.	Check if your computer is turned on.
2.	LED indicator (at the right side		2.	Ensure the computer is not in power saving mode (move the
	of the monitor) is orange			mouse or press a key on the keyboard to wake up the
				computer).
			3.	Check if the video signal cable is properly connected to the
				monitor and computer.

1.Picture shows “No Signal		Input”	1.	Check if your computer is turned on.
			2.	Check if the video signal cable is properly connected to the
				monitor and computer.

1.Picture shows “Input Signal		Out of	1.	Ensure that the resolution and/or refresh rate is set correctly.
Range”			(See item 2.1 of Monitor Installation section)

1.Picture not clear			1.	Press	buttons simultaneously to activate the Auto
				Adjustment function.
			2.	Check if the video signal cable is properly connected to the
				monitor and computer.
			3.	Adjust the screen resolution and refresh rate of your computer
				to SXGA.

(resolution: 1280*1024, refresh rate: 60Hz) for the best performance