Digimate DGL3704M Main Menu There are seven SUB-MENUS in the main OSD Menu, TV mode Press Menu

Operation - TV

OSD MENU DESCRIPTION

To access MENU, navigate and make adjustments using; MENU、cCH、dCH、

eVOL、f VOL and ENTER.

yPressing “MENU” displays the OSD menu. Use cCH / dCH on the remote controller to scroll the options on the menu.

yPress “ENTER” button to enter sub menu.

yUsee/f to adjust settings.

yPress “ENTER” to confirm desired settings.

yPress “MENU” after adjustment is made, to revert to the next adjustment.

yPress “MENU” to exit the current OSD menu.

Main Menu:

There are seven SUB-MENUS in the main OSD Menu.

1.TV PARAMETERS; 2.PC PARAMETERS; 3.AUDIO SETTINGS; 4.Picture-In-Picture;

5.CHANNEL SETTINGS; 6.PARENTAL CONTROLS; 7.GENERAL SETTINGS.

In TV mode – Press MENU

Use e/f buttons to select the submenu: TV Parameters, Audio Setting, Picture-In- Picture, Channel Settings, Parental Controls, and General Settings.

Note: In TV mode, “PC Parameters” cannot be selected.

In Video mode (S-VIDEO, AV1 ,AV2, AV3, COMPONENT1(Y1Cb1Cr1) , COMPONENT2(Y2Pb2Pr2))

Press “MENU” button, Main menu will be displayed on the screen (see figure above). Use e/f buttons to select the submenu: TV Parameters, Audio Setting, Picture-In- Picture, and General Settings.

Note: 1. In this mode, “Channel Settings” cannot be selected.

2.For devices with PROGRESSIVE SCAN 480p, 720p or 1080i output, connect them to Component-2jacks to obtain the ideal resolution and picture quality.

In PC mode (DVI, VGA)

Press “MENU” button, Main menu will be displayed on the screen (see figure above). Use e/f buttons to select the submenu: Audio Settings, Picture-In-Pictureand General Settings.

Note: In this mode, “TV Parameters” and “Channel Settings” cannot be selected.

10