Digimate DGL20 manual Do not attempt to service the Dispay yourself

Page 4

TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR DISPLAY, PLEASE BE AWARE OF ALL WARNINGS AND SAFETY PRECAUTIONS CONTAINED BELOW.

Never Insert anything into DISPLAY!!

¾Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.

¾Never spill liquid of any kind on the Display

Do not attempt to service the DISPAY yourself!!

¾Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to qualified service personnel.

Do not touch your DISPLAY and antenna during thunderstorms!!

¾Unplug the Display during thunderstorms or if it is not going to be used for an extended period.

¾Failure to do so may result in electric shock or fire.

ATTENTION!!!!

¾Unplug the DISPLAY from the wall socket before cleaning.

¾Use a damp cloth for cleaning.

¾Do not use liquid or aerosol cleaners.

Well ventilation is required!!

To ensure reliable operation of the product and to protect it from overheating, the ventilation must not be blocked or covered.

¾The DISPLAY should be no less than 4 inches away from the wall, and always keep the vent clean.

¾Do not place your DISPLAY in a cramped and inadequately ventilated place.

¾Avoid placing your DISPLAY upside down at any time.

Note:

Read all safety and operating instructions before operating your new Display.

To ensure good ventilation, a distance of more than 4 inches should be maintained between the Display and any other furniture.

WARNING

To reduce the risk of fire or electric shock, do not expose the product to water, and never open the rear cover.

3

Image 4
Contents User’s Manual Important Safeguards Power Sources Do not attempt to service the Dispay yourself FCC Compliance Statement Radio Frequency Interference StatementAntenna Connections Table of contents Unpacking and checking package contents AccessoriesRemote Control Location of controls Front panel buttons:Side view Bottom viewRemote control Keys Key FunctionInstalling your display Pressd/c keys on the remote control to choose Pressd/ckeys on the remote control to chooseTV setup then confirm with Enter key Select Country usingBasic operation OSD menu setting Picture Adjusting  In TV & Video mode Adjusting the picture setting In PC mode Adjusting the picture setting Image Adjusting  In PC mode OnlyAudio Adjusting  In TV & Video & PC modeAdjusting the audio setting Misc AdjustingOther function setting Using main menu Closed CaptionMenu -TV Picture Audio Input Select TV Setup Misc Language ChipChanging Password  Unlock the ProgramTroubleshooting VGA mode Supported Frequencies