Digital Media Wire L32 Searching for Component Codes, Using a Cable Box or Satellite Box Remote

VIZIO L32 HDTV User Manual

3.6.4 - Searching for Component Codes

If the user cannot find the manufacturer in the component list or the program code does not work, the user can use the remote control to search for the correct component code.

To search for a component code:

1.Turn on the component.

2.Press the matching component button on the remote control.

3.Press and hold the SETUP button until the LED flashes twice.

4.Press 9 9 1. The LED flashes twice.

5.Point the remote control at the component and then alternate between pressing the POWER button and the component button on the remote control until the component turns off.

If the component still does not respond, clear the component button, then repeat the search procedure.

3.7 – Using a Cable Box or Satellite Box Remote

Your VIZIO remote uses codes 1758 and 0178 to work with your L32 LCD TV.To use a cable or satellite remote to work with your L32, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 4-digit remote program, first try 1758. If that doesn’t work, use 0178. If your cable or satellite remote is a 5-digit remote code program (like most Direct TV units), first try 11758. If that doesn’t work, use 10178. If your cable or satellite remote uses a 3-digit code (For example, Echostar and Dish Network), use code 627.

NOTE: Some functions on your cable or satellite remote may not function like expected.Typically, power, volume and mute will work.

	55
Version- 11/29/05	www.VIZIOCE.com