Chapter 4: Operation
Power
The touchmonitor ships in an ON state.
To turn the touchmonitor on or off, press the touchmonitor power button on the OSD controller once.
The Power Status LED on the OSD controller functions according to the following table:
Touchmonitor status | LED status |
OFF | OFF |
SLEEP | PULSING |
ON | ON |
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications, refer to technical specifications on the Elo website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.
Touch
Your touchmonitor is
iTouch Plus Touchscreen Technology
When connected to Windows 7 computers, the touchmonitor can report two simultaneous touches. The iTouch Plus touchscreen can be
The iTouch Plus driver will only support multiple monitor if they are all using the iTouch Plus
User Manual: 1930L/1931L
SW602163 Rev A, Page 15 of 33