Elo TouchSystems SW602163 Rev A user manual Connector Panel & Interfaces Touchmonitor Connections

Page 6

Connector Panel & Interfaces

Touchmonitor Connections

1.Connect the DVI or VGA video cables between the monitor’s DVI/VGA input connectors and your DVI/VGA video source. Tighten the video cable’s screws for best performance.

2.Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port.

3.Connect a 12VDC power supply to the monitor’s input power jack.

4.The touchmonitor ships in an ON state, video should be displayed on your monitor already.

User Manual: 1930L/1931L

SW602163 Rev A, Page 6 of 33

Image 6

Contents Elo Touch Solutions 1930L/1931L Touchmonitor Copyright 2014 Elo Touch Solutions, Inc. All Rights Reserved Table of Contents Precautions IntroductionProduct Description Installation Unpacking the TouchmonitorConnector Panel & Interfaces Touchmonitor Connections Installing the Touch Technology Software Drivers SW602163 Rev A, Page 8 SW602163 Rev A, Page 9 SW602163 Rev A, Page 10 Click on Unzip button to unzip files SW602163 Rev A, Page 12 Mounting General Mounting InformationSide Bracket Mount Rear Vesa Mount Touch PowerOperation ITouch Plus Touchscreen TechnologySW602163 Rev A, Page 16 SW602163 Rev A, Page 17 SW602163 Rev A, Page 18 Projected Capacitive Touch Technology Gesture Support VideoOn-Screen Display OSD OSD OSD and Power Lockouts Solutions to Common Problems Technical SupportTechnical Assistance Safety & Maintenance SafetyCare and Handling Waste Electrical & Electronic Equipment Directive Weee Electrical Safety Information Regulatory InformationII. Emissions and Immunity Information SW602163 Rev A, Page 28 III. Agency Certifications IV. China RoHSPower Adapter Specifications VI. Monitor SpecificationsSW602163 Rev A, Page 31 Warranty Information Getting in Touch with us Check out Our Website