InFocus 61md10, 50md10 How to Connect TV + CableCARD, Setting Up Digital Cable Television Service

Connections & Setup

CABLE

ETHERNET
DIGITAL
AUDIO
OUTPUT
	SUBWOOFER		CTR
			R
	FIXED/		REAR
			L
			REAR
			MATRIX
			SURROUND
			OUTPUTS
CableCARD™	DigitalCable
	Card
			INPUT 3
HDMI/DVI			R
INPUT
Use menu for
DVI audio.		L	L
	COMPOSITE
	INPUTS
		V	V
CABLE
INPUT
		S-VIDEO	S-VIDEO
		R	R
For Factory Use Only
		L	L
	COMPONENT/
	COMPOSITE
	INPUTS
	Use menu for	PR	PR
	composite
	video.
		PB	PB
POWER
(AC 120V~60Hz)
ANTENNA		Y/VIDEO	Y/VIDEO
INPUT
		INPUT 2	INPUT 4
TV

FCC Statement: This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A security card provided by your cable operator is required to view encrypted digital programming. Certain advanced and interactive digital cable services such as video-on- demand, a cable operator’s enhanced program guide and data-enhanced television services may require the use of a set-top box. For more information, call your local cable operator.

How to Connect: TV + CableCARD

The CableCARD slot allows you to use a digital cable television card to receive digital cable services, including premium and HDTV cable channels, without the need for a set-top box. Please contact your local cable company for availability of services and to obtain a digital cable television card.

When you receive the digital cable card, make sure you connect your coaxial cable to the CABLE INPUT jack. Then, turn on your TV. Insert the digital cable card into the slot on the back of the TV labeled CableCARD. Push firmly on the card until almost the entire card is inserted. Wait to receive information on-screen regarding your digital cable television services. See below for information on setting up digital cable television services for your TV.

You should know:

•Once the digital cable card is authorized for a particular TV, the card can’t be used with any other TV, unless it is re- authorized to it.

•You won’t receive digital cable channels if you connect your cable to the ANTENNA INPUT. Make sure you connect your cable to the CABLE INPUT.

•Once inserted, it is not recommended you remove the digital cable card. In the case it needs to be removed, grasp firmly, and pull the card straight out.

Setting Up Digital Cable Television Service

Once you have connected a digital cable card to the CableCARD slot on the back of the TV (explained above), you are ready to receive digital cable channels. Wait approximately 30 seconds for the status screen to appear. Write down the information you see and call your cable company to provide them with the information on-screen.

Notes: If your information screen disappears before you have a chance to write down the information, press MENU on the remote to access the menu system. Then press 9, 9, 9, and the information screen appears. Go to page 66 for more information on the CableCARD Tools menu.

You can’t order video-on-demand through your digital cable card. Call your local cable company to place an order.

20 Chapter 1