Using the TV’s Menu System
Mirror Adjustment Over time the small mirror inside the TV may shift slightly. You’ll notice the edges of the picture aren’t symmetrical or parallel, or one of the top corners is too far in or out. Try adjusting the edges by using Trapezoid- Left and Right. If this doesn’t help, use the screws behind the front panel piece to adjust the corner edges while watching the test pattern on screen. Use a 4 mm. Allen wrench or Philips screwdriver to adjust the screws. Go to page 10 for information on removing the front panel piece and location of the mirror adjustment screws.
Press OK to select Mirror Adjustment and select Yes to continue. Selecting Yes resets
Trapezoid- Left and Right adjustments you’ve made.
With the test pattern on screen, look at the top corners of the test pattern. Adjust the corner that is farthest in towards the center of the TV so the top horizontal line is parallel with the top edge of the TV. For example, if the left corner is farthest in towards the center, turn the left screw counterclockwise. If you feel a resistance as you turn the screw, stop turning it.
Tightening the screw more could damage it (try turning the opposite screw clockwise). Now see if the left and right lines are parallel. If they aren’t, use the middle screw to adjust them until they’re parallel with the edges of the TV. If necessary, use the up and down arrow buttons on the remote to vertically center the test pattern. To exit the test pattern, press OK, then use the Trapezoid- Left and Right option to fine tune the picture, if necessary.
Reset Controls Menu button resets all Picture Quality controls to their original factory settings (except Personal Picture Preset and Horizontal and Vertical Position) for the currently tuned input (see
1.Tune to the input you would like to reset.
2.Press MENU to access the Main Menu.
3.From the Advanced Settings menu, select Reset Controls, and then select Reset to reset the settings for the currently tuned input.
0 Go Back
1 Picture Quality
2Audio
3Recordings
4Parental Controls
5Connections
6Preferences
7Assisted Setup
8Web Browser
Main Menu
The Audio menu has screens for setting the audio features and for tweaking the sound:
•Equalizer Presets: Select a preset or adjust the equalizer.
•Audio Processor: Choose the way for programs to sound.
•Sound Logic: Turn it on to minimize variations in volume.
•Audio Mode: Select default or current audio for digital TV.
•SAP: Turn on SAP to hear different audio for NTSC sources.
•Balance: Shift the audio between the left and right speakers.
•Audio Connections: Set up to match your sound system.
Press OK orto access the Audio menu.
Audio Menu
The Audio menu lets you adjust audio output. To access the Audio menu, press MENU on the remote, and then select Audio from the main menu. The following audio items can be adjusted: Equalizer Presets, Audio Processor, Sound Logic, Audio Mode, SAP, Balance, and Audio Connections.
| Main Menu | Audio |
|
|
|
|
|
|
0 Go Back | Flat | Videogame Preset Settings |
|
| ||||
1 EqualizerText here Presets | Standard | +12 |
|
|
|
|
|
|
2 Audio Processor | Cinematic |
|
|
|
|
|
|
|
3 Sound Logic | Music |
|
|
|
|
|
|
|
4 Audio Mode | Voice | 0 dB |
|
|
|
|
|
|
Videogame |
|
|
|
|
|
| ||
5 SAP |
|
|
|
|
|
| ||
Video Camera |
|
|
|
|
|
| ||
6 Balance |
|
|
|
|
|
| ||
Personal | 5 | 3 | 0 | 1 | 2 | 3 | ||
7 Audio Connections |
|
|
|
|
|
|
| |
| 120 | 200 | 500 | 1.2 | 3 | 7.5 | 12 | |
|
| Hz | Hz | Hz | kHz | kHz | kHz | kHz |
For each input select a different equalizer preset or create a
Personal preset with the equalizer. Press OK to continue.
Equalizer Presets
You can select one of the
Note: Equalizer Presets are stored for each input. All other audio feature settings are stored globally across all inputs and not per input.
Chapter 4 | 59 |