Connections at the X100 (remote) module
1Place the X100 module adjacent to the remote user location.
2Attach the video monitor, keyboard, mouse (and, optionally for X100A users, speaker) connectors to the sockets of the Adder X100 module.
3Attach the connector of the cable run leading from the CAM to the TO LOCAL socket of the X100.
rde mco.
Category 5, 5e or 6 cable leading to the CAM module
TO | L |
| O |
| C |
| A |
| L |
PO | WER |
|
contents
From mouse From keyboard
Adder X100
module
|
| Adder X100 | welcome |
From | From | module | |
| |||
speakers | power |
|
From video monitor
| (X100A models | adapter |
|
| only) |
|
|
4 | (X100A models only) Insert the speaker connector to the light green | installation & | |
| coloured socket situated between the link connector and the power in | ||
| socket. |
| |
5 | Insert the output connector of the power supply into the socket at the front | ||
| edge of the X100 module labelled POWER. |
| |
6 | Insert the IEC connector of the supplied power lead into the corresponding | special configuration | |
| socket of the power supply. Connect the other end of the power lead to a | ||
| nearby mains socket. |
| |
7 | Where necessary, use the | ||
| any effects caused by the cable run. See Video compensation for details. | ||
|
|
| |
|
|
| |