Triax C-HD417 CX Safety Precautions, Mains supply Placing Ventilation Liquids etc Thunderstorm

Page 4

Safety Precautions

To prevent hazardous and dangerous situations always install and use the set-top box according to the instructions below.

Mains supply

Placing

Ventilation

Liquids etc.

Thunderstorm

95-240 V AC 50/60Hz. Only use the original power supply. When disconnecting from the mains pull the plug rather than the wire.

Use only mains connections installed by professionals.

Place the set-top box on a solid and surface close to the mains connection. Ensure that the mains cord is places rightly to avoid later damages hereon.

Never place the set-top box on top of other electrical units.

Never place the set-top box next to a heater or other source of heat or direct sunlight.

Never expose the set-top box to a high level of dust.

Never place the set-top box in a closed cabinet without proper ventilation.

Never put objects on the top of the set-top box preventing natural ventilation.

Never expose the set-top box to liquids or moisture, and never place objects containing any kind of liquid on the top of the box.

Never place hot or burning items such as candles on the set-top box.

In case of thunder storms or when left unused for long periods of time, it is recommended to disconnect the set-top box from the mains and antenna.

Accessories

Never use accessories not being recommended by the

 

manufacturer.

Service

The set-top box should be opened by authorized technicians only.

 

Warranty is affected if non-authorized persons open the box.

Cleaning

The set-top box should always be kept dry and only dry cleaning

 

should be done.

Disconnect the mains IMMEDIATELY and contact an authorized technician place if:

Mains cord or plug is damaged.

The set-top box has been exposed to foreign bodies or liquid.

The set-top box doesn’t work.

The set-top box is heavily damaged.

4

Image 4
Contents Triax C-HD417 CX Digital cable set-top boxPage Contents Safety Precautions AccessoriesService CleaningDisposal of batteries and set-top box Overview Front panel incl. CA-module and smart card Rear panelInserting batteries in remote control unit Remote control unit How to use the remote control Switch on TV and the set-top box Use NowWelcome Select language and country Data for channel searchingSearching for channels Ready for useSwitch the set-top box on or off Adjust the volumeSwitch between TV and radio Day-to-day UseShow the information bar Display subtitlesUsing Electronic Programme Guide EPG View teletextSorting the information Scrolling the listing of programmesSelect a broadcast To view details of the broadcastFavourite channel lists Audio PVR functionTime-shifting a broadcast To stop the time-shift functionPlayback a recording Record a broadcastStop the playback of a recording How to Use the On-Screen Menus Display the main menuSelect a menu Select a submenuSelect or adjust To return to TVOverview of Menus Menus SubmenusEditing of Channels Favourite listsDeletes the selected channel from the list Displays TV lists, Radio lists and Favourite listsPage Using the Timer Function Timer programming using EPG Customizing the Set-top Box LanguageRegion OutputLock Lock/Unlock channelsFactory setting is Change PINChannel search Auto searchManual search Advanced search Copy channel data via USBSelect the frequency step size from 0.5 8 MHz Select modulation. You have six options, AutoAdvanced Updating software via USB stick Technical Information Smart Card PVR function Playback Troubleshooting Problem Possible cause Suggested solutionGlossary Technical Data Manufacturer Declaration of ConformityLicense 06-2010-B