REPAIR PARTS
#19-0038 2:1 RATIO GEARBOX
Use
NOT USE GREASE FOR LUBRICANT.
KEY | PART NO. | DESCRIPTION |
1 | Output Shaft/Gear Assembly | |
2 | Seal | |
3 | Bearing Cone | |
4 | Bearing Cup | |
5 | Retaining Ring | |
6 | Input Shaft/Gear Assembly | |
7 | Gearbox Casting (Tapped Holes) | |
8 | Gearbox Casting (Thru Holes) | |
9 | Vent Plug, 5 PSI | |
10 | Bushing, | |
11 | Plug, | |
12 | Bolt, |
NOTE: Gearbox may be flipped 180 degrees if input power rotation is opposite standard rota- tion. (Truck mount boxes only)
CAUTION: VERIFY CORRECT DRIVE ROTATION BEFORE OPERATING. FAILURE TO DO SO MAY RESULT IN SEVERE EQUIP- MENT DAMAGE.
8100 Rear Unload |