Copy channels to USB stick
Restore channels from USB stick
Copy provider list to USB stick
Restore provider list from USB stick
Copies the list of channels from the
Copies the list of channels from the USB stick placed in the USB socket to the
Copies the list of CATV providers from the
Copies the list of CATV providers from the USB stick placed in the USB socket to the
Advanced
Transparency
Banner time
Low power standby
OTC software update
Factory reset
Select whether you want menus and information bar to be transparent.
Select the number of seconds the info banner is displayed when you change channel. Maximum time for displaying the information banner is 10 sec.
Select whether you want low power consumption when the set- top box is in standby mode. If you select “On”, the loop through from the antenna socket ANT in to the antenna socket ANT out on the
Select OTC software update and the software of your set- top box will be updated if your CATV provider has made new software available. If new software is unavailable you will get a message telling you so.
Select Factory reset if you want to bring all settings back to factory settings.
31