Denon RC-8000 manual Features, Before Using

ENGLISH

1

FEATURES

The RC-8000 can be used for integrated control of remote controllable devices connected to an AV amplifier (for example TV sets and DVD players) as well as remote control compatible peripheral devices (for example lighting equipment and power screens).

Icons are registered for 20 types of devices, and presettings are available for 14 of these device types. (Of the device types for which presettings are registered, six are for Denon products only).

Devices for which no presettings are registered can be operated using the learning function.

In addition, system call settings can be made to operate multiple devices at once in a “macro” sequence.

1.Large liquid crystal touch display

320 x 240 dot liquid crystal display with EL back light.

2.Preset memory function

Easy memory presetting thanks to a preset memory search function (1-button search).

3.System call function

Up to 20 system call settings (10 codes per setting) can be registered.

Delay times can be set between the transmission codes.

4.Customizing function

Up to 23 extra devices to be used can be registered additionally, and buttons can be moved and their names changed for easier use.

5.User menu function

The user menu settings can be used to register frequently used buttons on a single page and this page can always be displayed first.

6.User backup function

Customized settings can be backed up so that set data is not lost.

7.Learning function

The remote control signals of your devices can be stored (“learned”) in the RC-8000, so all your equipment can be operated using the RC-8000.

Approximately 200 codes can be learned.

8.RF transmission function (only when the RC-8000 and RC-8001ST are used in combination)

RF transmission is possible when the RC-8000 is used in combination with the RC-8001ST.

9.Charging function (only when the RC-8000 and RC-8001ST are used in combination)

When using the nickel cadmium battery included with the RC-8001ST, the RC-8000 can be charged on the RC-8001ST.

10.USB update function

In the future the RC-8000 will allow customizing and updating of remote control signals on a personal computer through connection to the computer using the USB connector.

(A separately available PC application program is required.)

2BEFORE USING

Loading the LR6 (AA size) alkaline batteries

qSlide the battery cover on the rear of the RC-8000 to

remove it.

wInsert the included

alkaline batteries, being careful to do so in the proper direction.

eClose the battery cover.

Notes on Batteries

•Use LR6 (AA size) alkaline batteries in the remote control unit.

•The batteries should be replaced with new ones approximately once a year, though this depends on the frequency of usage.

•Even if less than a year has passed, replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the set. (The included battery is only for verifying operation. Replace it with a new battery as soon as possible.)

•When inserting the batteries, be sure to do so in the proper direction, following the “<” and “>” marks in the battery compartment.

•To prevent damage or leakage of battery fluid:

•Do not use a new battery together with an old one.

•Do not use two different types of batteries.

•Do not short-circuit, disassemble, heat or dispose of batteries in flames.

•Remove the batteries from the remote control unit when you do not plan to use it for an extended period of time.

•If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.

•When replacing the batteries, have the new batteries ready and insert them as quickly as possible.

•The learned remote control signals may be cleared if no batteries are in the remote control unit for about 5 seconds.

The factory-installed codes are in permanent memory, however.

3