Humax VACI-5300, VA-5200, NACI-5700, F1-5000, CI-5100 E10, TV with VCR and Motorised SystemDiSEqC

TV with VCR and Motorised System(DiSEqC 1.2)

1.Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV.

2.Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR.

3.Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to the RF IN connector on your TV.

4.Connect one end of a RF lead to the RF IN connector on your VCR and the other end to the RF OUT connector on the STB.

5.Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket on the STB.

6.Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial channels.

7.Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.

E10