Humax CI-5100, VA-5200, VACI-5300, NACI-5700, F1-5000 manual E38, Status, Common Interface

4-4. Status

STB Status

Displays the information of H/W Version, S/W Version, Loader Version and CI CAM of STB and so on.

•F1-5000 doesn’t support CI CAM.

Signal Detection

Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting.

STB Upgrade

You can download and upgrade the software of this STB via a satellite when the software of new version is released.

Do not turn off the STB during downloading.

When the power is switched OFF, turn on the STB and the process will be continued.

•CRCI-5500 models are not applicable.

4-5. Common Interface

You can enjoy not only scrambled services using the Conditional Access Modules(CAM), but also Free-To-Air services.

This STB currently supports six kinds of CAM(VIACCESS™, Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard). Common Interface module and Smart Card depend on the service provider. If you need CAM, contact your service provider or distributor.

Note : If CAM is not used, then only Free-To-Air services are available.

•F1-5000, VA-5200 models are not applicable.

E38