Humax IR-5410Z+ manual Data In/Out, GB46

A/V & DataIn/Out

TV SCART

VCR SCART

VIDEO AUDIO R/L

S/PDIF

RS-232C

Video Output(CVBS, S-Video, RGB) Audio Output

(Resolution : 20 bits DAC, Max. 2 Vrms) Video Output(CVBS)

Video Input(CVBS, S-Video, RGB)

Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed)) RCA/Cinch, Video Output(CVBS)

RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max. 2 Vrms)

Digital Audio Output, Fiber-Optic(Resolution : 20 bits) Transfer rate 115,200 bps, 9pin D-sub Type

RF-Modulator

RF-Connector

Frequency

Output Channel

TV Standard

Preset Channel

75Ω , IEC 169-2, Male / Female

470 - 860 MHz

CH21-69, CH28-69 or CH13-62 for the Remodulator PAL I/G/B/D/K selectable by Menu setting CH36(or TBD). Software changable by Menu

Power Supply

Input Voltage

Type

Power Consumption

Standby Power

Protection

190 - 250V AC, 50/60 Hz

SMPS

Max. 35W

≤11W

Separate internal fuse. The input shall have lightening Protection

Physical Specification

Size(W x H x D)

Weight(Net)

Operating Temp

Storage Temp

Storage Humidity

370 x 60 x 280 mm(Excluding the Foot) Foot height is 8 mm

Around 2.8 kg 0°C to + 45°C -10°C to + 70°C

5% ~ 95% RH(Non-Condensing)

You can use a special antenna switch with DiSEqC commands.

When changing ASTRA1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone through the antenna cable. The antenna switch will change ASTRA1 to EUTELSAT. The concept of DiSEqC is a protective trademark of EUTELSAT.

Data rate decides the picture quality of digital TV programmes.

Data rate of about 5-6 Mbit/s coincides with the picture quality of a analog TV programme.

GB46