8. Installation
This chapter describes how to search for channels and a series of procedures.
8.1. Channel Search
If your product is connected to the cable and television, you can search channels manually by searching parameters, if you know the MUX information.
1.Press the MENU 
button.
2.Select Installation using the 
button, and
press the OK 
button. You will be prompted to enter your password.
3.Select Channel Search using the 
button,
and press the OK 
or 
button.
1.Frequency
1.Select Frequency using the 
button, and
press the OK 
or 
button.
2.Enter the frequency using the
buttons and press the OK 
button.
2.Symbol Rate
1.Select Symbol Rate using the 
button,
and press the OK 
or 
button.
2.Select the symbol rate value using the 
button, and press the OK 
button.
3.When you select User Define to set symbol rate manually, enter symbol rate value using the NUMERIC(0~9) button.
GB 47