Kathrein UFD 510 manual New digital transponder

Initial settings

Optional other symbol rate
Enter an optional symbol rate using the numeric keys		to .
Encrypted programmes
NO	No encrypted programmes are recorded. the default setting
	is “NO“.
YES	Encrypted programmes are recorded.

Search run on satellite	The	keys can be used to select the satellite on which a search is to be
	made for new transponders, e.g. ASTRA19.
	If the “Start search run“ field is selected with the			key, the	key starts the
	search run.
Transponder list	The transponder list contains all of the transponders on which a search run can be
	carried out for programmes. All of the transponders recorded in blue typeface are
	defaults and cannot be changed. If a new transponder is set up with “New digital
	transponder“, this is recorded in the list in black typeface. The data for this
	transponder can be altered with the		key.

The duration of the search run can vary from 5 minutes up to approximately 60 minutes.

The faster option for finding programmes on the ASTRA satellites is the ASIUS search run.

New digital transponder

The input field for entering data for the new digital transponder is displayed on the screen.

Name	Think up a name for the new transponder.
	•	Using the		keys enter the name of the new transponder as follows:
	•	Select the letter with the			key. The choice starts with the letter “A“ at the
		point marked dark blue. Following the last letter, “Z“, the numerals “0“ to “9“ are
		displayed. If the desired letter is displayed, move to the next input position with
		the	key.
	• Select the desired letter there.
	• Enter the name of the new transponder in this way.
	If you want to change a letter proceed as follows:
	•	Using the		keys move to the position that you want to change.
	•	With the		key, the selection begins with the letter “A“ again.
Satellite	In this menu line you can select a satellite that your receiving system is aligned
	towards.

31