Kathrein UFD 510 manual TV Type

Page 35

Initial settings

TV TYPE

The settings for the TV set are displayed on the screen:

	The settings have the following meaning:
Screen format	The screen format for the TV set is determined by this setting.
	4:3	The aspect ratio of the screen is 4:3.
	16:9	The aspect ratio of the screen is 16:9.
	The default setting is “4:3“.
TV standard	The TV standard is determined by this setting.
	PAL	The PAL standard is permanently set.
Video output	The signal at the video output is adjusted with this setting.
	RGB	The RGB signal appears at the video output.
	SUPER	The S-VHS signal appears at the video output.

Select only the video output signal which your TV set is capable of processing.

TIME

The settings for the time are displayed on the screen.

	The settings have the following meaning:
Local time	Local time is displayed. The satellite is used as timing element.
Time zone	The time zone is shown in relation to GMT (Greenwich Mean Time).
	GMT+1 = MEZ (Central European Time). During summer time set to GMT+2.
	An incorrectly set time also affects the timer.
	If you have selected the menu line “Local time“, the	key can be used to

advance the time by one hour. With this the time zone is also increased. With the

key the local time is retarded by one hour and the time zone is decreased.

The time zones can be adjusted in the “Time zone“ menu line using the keys, which also results in simultaneous correct setting of the local time.

SOFTWARE UPDATE

The UFD 510 digital receiver comes supplied with the optimum system software. Over the course of time, it may become necessary to adapt the software to changed conditions.

This ensures that your digital receiver is always kept right up-to-date. The internal settings (e.g. TV and radio lists) are not altered as a result.

35

Image 35

Contents DVB Satellite Receiver UFD Controls, displays and connections Safety instructionsConnecting up and putting into operation Controls, displays and connectionsContents Rear panel controls and connections View of front panel View of rear panelFront panel controls and displays Remote control handset Remote control handset keys Important notes regarding operation Important notes for siting and installation Safety instructionsConnecting up the unit Connecting up and putting into operationSecondary receiver connection Switching over remote control’s command setDecoder connection Inserting batteries into remote control handsetChecking connections and operation On-screen display OSDElectronic programme guide and applications Switching the unit onSwitching the Navigator on Selecting a TV or radio programme TV or radio programme selection by entering a number Information about the current programme Switchover between TV and radio programmesAdjusting the volume Selecting TV programmes using bouquet selection Calling up the programme list Sort programmes Switchover between two TV programmesMultilingual programmes Muting the soundFor moving the programme highlighted Changing locked programmes Parental lockUnlocking a TV programme Locking a TV programmeLocking a radio programme Activating parental lockElectronic programme guide and applications Electronic programme guide and applications Electronic programme guide and applications Calling up the Installation menu Initial settingsTransponder list Bouquet organisationProgramme organisation Deleting a transponder or a programme Radio list Automatic search runTV list Astra Automatic search runTransponder search run New digital transponder New digital programme Satellite Menu SettingsOFF DiSEqC MenuTV Type System Diagnosis Date TimerCommon interface Application controlLanguage selection OSD Menue structure Features Specifications Scart socket pin assignments Temperature rangeAccessories Signal Pin NoConnection scheme Connection examplesConnection examples Connection examples DiSEqC menu Service and dealer settingsAsius Glossary, abbreviationsEb/No ratio Symbol rateDiSEqC DiSEqC components