Kathrein UFD 346 Tone muting switch, Stereo / Mono Channel Switching, Video Recorder Replay VCR

Page 13

Operating the Receiver

Tone muting switch

∙Press this button.

The tone will be muted, allowing you to telephone undisturbed.

∙Press this button again, to restore the volume.

Important

The muting switch has no control over the VCR scart-socket.

Stereo / Mono Channel Switching

Transmissions may be recorded using the two channel system.

(e.g. Original English tone on channel 1, German tone on channel 2).

∙Press this button to step through the tone options: Stereo → Channel 1 → Channel 2 → Stereo

∙The selected channel will be shown on the screen.

The selection will not be saved. After switching programs the original setting will be restored.

Video Recorder - Replay (VCR)

To use ”VCR-Replay”, the receiver must be switched on, then the signal path will be automatically switched through from the VCR scart-socket to the TV scart- socket.

SAT/TV Switching

When a satellite-receiver and a TV are connected with a single scart-cable, many TVs will switch the signal input over to video mode (at the scart-socket) immedi- ately the satellite receiver is switched on. The switching voltage must be turned off at the scart-socket if you want to watch a terrestrial TV transmission.

∙Press this button.

The switching voltage on pin 8 of the scart-socket will be switched off, and may be switched back on by pressing the same button again.

In SAT mode, ”SAT mode” will be displayed on the screen for approx. 3 seconds.

Operating the Receiver without a Remote Control

When the satellite-receiver is switched on it will automatically return to the mode it was in before it was switched off.

If the receiver was in ”Stand-by” mode when it was switched off at the mains, it will automatically return to the ”Stand-by” mode when switched on again. If you have miss-placed the remote control, you can switch the receiver back into the receiving

mode by pressing both buttons on the front side simultaneously.

By pressing both switches again you can switch between ”TV, analog and ADR radio” modes.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Kathrein Satellite Receiver UFD Contents Controls, displays and connection Front Panel View Rear-panel View Remote ControlFront Panel Remote control operating buttonsRear Panel Connections Important Locating and Setting-up Instructions Ventilation LocationMains supply HumidityLocating the Receiver Receiver LocationInfra-red Sensor Satellite signal connection Connecting the EquipmentPre-installation reception system Voltage-SuppliesDecoder Connection Installing batteries in the Remote ControlSwitching between TV and Radio modes Switching on the equipmentOperating the Receiver Channel SelectionCategory Selection in ADR Radio Mode Displaying the Previous Title in ADR Radio ModeAnalog Radio Programs Digital Radio Reception ADRThis menu is displayed Volume, Balance and Tone SettingsStereo / Mono Channel Switching Tone muting switchSAT/TV Switching Operating the Receiver without a Remote ControlDisplaying the Help Menu and Program Listings Channel numbers changing, sorting and copyingHelp Menu Program Listings Tuning a Weak Reception SignalSelecting TV Programs Setting-up TV ProgramsVideo Menu Polarity/Orbital Position Satellite frequenciesPolarity Orbital PositionProgram Name Decoder menuAudio Menu Audio De-emphasis mono-wide mode onlyAudio modes Audio frequencySelecting Radio Programs Selecting Radio ProgramsAnalog Radio Menu ADR Radio MenuCalling-up the Basic Setting-up Menu Basic Setting-upOSD Window Language LNB Voltage-supply at Stand-by LNB Voltage-supplyProgram Selection On Screen Display Window OSDChanging the Oscillator frequency Oscillator FrequencyKHz Signal DiSEqC-Signal Digital Satellite Equipment ControlDiSEqC Menu Settings Tone Burst Tone Burst and DiSEqC SignalDiSEqC DiSEqC RepeatEeprom Menu Option Remote Control Command Set SwitchingEquipment features HF-Characteristics Technical DataVideo Audio digitalAccessories Temperature rangeVoltage supply ConnectionsMenu Structures Video and Audio Settings menusRadio Settings Menu Setting-up Options Basic setting-up menuESC Connection example / Service note / Service note

UFD 346 specifications

Kathrein UFD 346 is a versatile and technologically advanced universal digital receiver designed to meet the demands of modern broadcasting and entertainment. Known for its robust performance and exceptional features, the UFD 346 stands out in the competitive market of digital receivers.

One of the main features of the Kathrein UFD 346 is its ability to receive both DVB-S2 (Satellite) and DVB-T2 (Terrestrial) signals. This dual capability allows users to access a wide variety of television channels, ensuring a comprehensive viewing experience. The receiver supports high-definition (HD) video formats, delivering crystal-clear picture quality, which is essential for immersive viewing.

The UFD 346 is equipped with a built-in electronic program guide (EPG), providing users with an easy way to navigate through available channels and programming. This feature enables viewers to plan their viewing schedules efficiently, as they can see what shows are on and when. Additionally, the device supports teletext and interactive features, enhancing the overall user experience.

In terms of connectivity, the Kathrein UFD 346 offers multiple options. It includes HDMI output for high-quality video and audio transmission, along with composite outputs for older television models. The device also features USB ports, which allow for the connection of external storage devices. This functionality enables users to record their favorite shows, pause live TV, and even playback videos from USB drives.

The receiver is designed for easy installation and setup. With its user-friendly interface and straightforward remote control, both novice and experienced users can quickly navigate the settings and access their desired content. The built-in setup wizard simplifies the installation process, guiding users through the necessary steps to get started.

Another significant characteristic of the Kathrein UFD 346 is its robust build quality and energy-efficient operation. The device is engineered to operate quietly and efficiently, reducing energy consumption without compromising performance. This makes it an environmentally friendly choice for consumers mindful of their energy usage.

In conclusion, the Kathrein UFD 346 is an exceptional universal digital receiver, designed to cater to the diverse needs of modern viewers. With its dual DVB-S2 and DVB-T2 support, high-definition output, user-friendly interface, and variety of connectivity options, it stands out as a reliable and feature-rich option for anyone looking to enhance their television viewing experience.
Top Page Image Contents