Kathrein UFD 346 Satellite frequencies, Polarity/Orbital Position, Video-hub, Oscillator

Page 17

Selecting TV Programs

Satellite frequencies

The 5 digit frequencies in the range 10700 to 12747 MHz. may be entered by using

the number buttons . With these buttons you may tune the re- ceiving frequency correctly using 1 MHz. steps (recommended when the picture signal is weak and fading.)

Polarity/Orbital Position

In both of the following menus you may select the required LNB feed-voltage and the 22 kHz switching-signal (which is over-ridden by the LNB feed-voltage).

Polarity

The ”Polarity” menu allows you to select the correct voltage level (14/18V), the po- larity and the 22 kHz. switching signal for the frequency range. (see table).

Frequency range

Polarity

LNB voltage

22 kHz switching

Settings

 

 

 

signal

 

10.7-11.7 GHz

vertical

14 V

Off

Vert. Low

 

horizontal

18 V

Off

Hor. Low

Orbital Position

The ”Orbital Position” menu allows you to select the 22 kHz switching-signal thus enabling you to change between two (or more) satellites for multi-feed reception systems (see following table).

 

Satellite

Orbital position

22 kHz switching signal

 

 

 

 

 

Astra 19,2° East

1

Off

 

 

Eutelsat 13° East

2

On

 

Eutelsat 10° East

3

Off

 

Eutelsat 16° East

4

On

 

In the ”Basic Setting-Up” menu (sub-menu ” DiSEqC”) there is an explanation of

 

which menu-option requires the 22 kHZ switching-signal. (Polarity or Orbital posi-

 

tion).

 

 

 

Important

The Astra-satellites only use digital signals in the upper frequency ranges (High -

 

band). Correspondingly a special receiver (DVB-Receiver; d-Box) is required.

 

Conventional (analog) signals are used in the lower frequency ranges (Low-band).

 

This is standard with the Eutelsat-programs.

 

 

 

∙ Select the required polarity, this is always either Vert. Low or Hor. Low.

Due to tests made during the manufactures pre-installation will you find (upon de- livery) in the Basic Setting-Up menu ”DiSEqC” menu-column ”22 kHz Signal” the entry ”Pos. A/B” selected.

The selections Vert. High and Hor. High are not to be used.

Video-hub

The satellites transmit their signals using different video-hubs, 16 or 25 MHz.

Which one to select is dependant on the screen brightness.

∙ Select the video-hub that gives the best screen brightness.

Oscillator

The receiver has 4 LO frequency groups available (LO 1 - LO 4), whose selection ensures a problem free change over to different feeder-systems with other oscilla- tor frequencies (i.e. Telecom 1A).

When delivered from the manufacturer all 4 oscillator frequencies are set to 9.75 GHz (9750 MHz)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Kathrein Satellite Receiver UFD Contents Controls, displays and connection Front Panel View Rear-panel View Remote ControlRear Panel Connections Remote control operating buttonsFront Panel Important Locating and Setting-up Instructions Ventilation LocationMains supply HumidityInfra-red Sensor Receiver LocationLocating the Receiver Satellite signal connection Connecting the EquipmentPre-installation reception system Voltage-SuppliesDecoder Connection Installing batteries in the Remote ControlSwitching between TV and Radio modes Switching on the equipmentOperating the Receiver Channel SelectionCategory Selection in ADR Radio Mode Displaying the Previous Title in ADR Radio ModeAnalog Radio Programs Digital Radio Reception ADRThis menu is displayed Volume, Balance and Tone SettingsStereo / Mono Channel Switching Tone muting switchSAT/TV Switching Operating the Receiver without a Remote ControlHelp Menu Channel numbers changing, sorting and copyingDisplaying the Help Menu and Program Listings Program Listings Tuning a Weak Reception SignalVideo Menu Setting-up TV ProgramsSelecting TV Programs Polarity/Orbital Position Satellite frequenciesPolarity Orbital PositionProgram Name Decoder menuAudio Menu Audio De-emphasis mono-wide mode onlyAudio modes Audio frequencySelecting Radio Programs Selecting Radio ProgramsAnalog Radio Menu ADR Radio MenuOSD Window Language Basic Setting-upCalling-up the Basic Setting-up Menu LNB Voltage-supply at Stand-by LNB Voltage-supplyProgram Selection On Screen Display Window OSDChanging the Oscillator frequency Oscillator FrequencyDiSEqC Menu Settings DiSEqC-Signal Digital Satellite Equipment ControlKHz Signal Tone Burst Tone Burst and DiSEqC SignalDiSEqC DiSEqC RepeatEeprom Menu Option Remote Control Command Set SwitchingEquipment features HF-Characteristics Technical DataVideo Audio digitalAccessories Temperature rangeVoltage supply ConnectionsMenu Structures Video and Audio Settings menusRadio Settings Menu Setting-up Options Basic setting-up menuESC Connection example / Service note / Service note

UFD 346 specifications

Kathrein UFD 346 is a versatile and technologically advanced universal digital receiver designed to meet the demands of modern broadcasting and entertainment. Known for its robust performance and exceptional features, the UFD 346 stands out in the competitive market of digital receivers.

One of the main features of the Kathrein UFD 346 is its ability to receive both DVB-S2 (Satellite) and DVB-T2 (Terrestrial) signals. This dual capability allows users to access a wide variety of television channels, ensuring a comprehensive viewing experience. The receiver supports high-definition (HD) video formats, delivering crystal-clear picture quality, which is essential for immersive viewing.

The UFD 346 is equipped with a built-in electronic program guide (EPG), providing users with an easy way to navigate through available channels and programming. This feature enables viewers to plan their viewing schedules efficiently, as they can see what shows are on and when. Additionally, the device supports teletext and interactive features, enhancing the overall user experience.

In terms of connectivity, the Kathrein UFD 346 offers multiple options. It includes HDMI output for high-quality video and audio transmission, along with composite outputs for older television models. The device also features USB ports, which allow for the connection of external storage devices. This functionality enables users to record their favorite shows, pause live TV, and even playback videos from USB drives.

The receiver is designed for easy installation and setup. With its user-friendly interface and straightforward remote control, both novice and experienced users can quickly navigate the settings and access their desired content. The built-in setup wizard simplifies the installation process, guiding users through the necessary steps to get started.

Another significant characteristic of the Kathrein UFD 346 is its robust build quality and energy-efficient operation. The device is engineered to operate quietly and efficiently, reducing energy consumption without compromising performance. This makes it an environmentally friendly choice for consumers mindful of their energy usage.

In conclusion, the Kathrein UFD 346 is an exceptional universal digital receiver, designed to cater to the diverse needs of modern viewers. With its dual DVB-S2 and DVB-T2 support, high-definition output, user-friendly interface, and variety of connectivity options, it stands out as a reliable and feature-rich option for anyone looking to enhance their television viewing experience.
Top Page Image Contents