Kathrein UFC 762si, UFC 762sw manual Common Interface, Inserting the Smartcard and the CA Module

COMMON INTERFACE

IMPORTANT INFORMATION

Always follow the operating instructions from your Pay-TV provider and the instructions supplied with the Smartcard and the CA module!

Smartcards and CA modules are not included with this product!

The cards and modules are issued by the respective Pay-TV providers, and contain the subscriber data and details of the channels for which the subscriber has paid. These channels are always encrypted.

Contact the Pay-TV provider if you are interested in subscribing to a particular Pay-TV channel.

You are responsible for the use of the Smartcard in the CA!

The Smartcard sold by the Pay-TV provider, specific to a particular encryption technology, is inserted into the CA module.

Store your card and PIN code securely when not in use!

INSERTING THE SMARTCARD AND THE CA MODULE

INSERTING THE CA MODULE INTO THE CI



The Common Interface (CI) of the UFC 762si/sw can accept one CA (Conditional Access) module. The CI slot is under the display at the right of the front panel.

The CA module  draws in the Smartcard  (chip contacts pointing upwards and towards socket strip)

which it then inserts into the CI slot .

Insert the Smartcard into the CA module without excessive force. This also applies to inserting the CA module into the CI slot.Do not use excessive force, and follow the instructions supplied with the Smartcard and the CA module.

To remove the module, press the relevant eject button .

INSERTING THE SMARTCARD INTO THE SMARTCARD READER

The Smartcard is inserted into the Smartcard reader (Cryptoworks embedded) in exactly the same way as into the CA module, except that in this case the chip contacts point downwards.

22