Schlage BE365 Programming for All Models, 6DPC Reenter 6DPC, Schlage Button on front of lock

Programming for All Models

Label is located on front of guide and back of keypad assembly.
Four-Digit User Codes				Six-Digit Programming Code
(4DUC)						(6DUC)
		Programming Code: 123456
•	Activates lock				•		Programs lock
		User Code A: 4321 S/N: 1-00000000
•	Can be changed	User Code B: 5678 Model: BE365				•	Can be changed
• Up to 19 user codes						•	Won't operate lock
			Example
•	Won't program lock

Schlage Button (on front of lock)

•Lights orange while in programming mode.

•Flashes green when programming is successful.

•Lights red when there is an error. Retry steps or see troubleshooting guide on page 11.

•Press to exit programming mode at any time.

•Wait until button stops flashing before entering additional codes.

Legend

= Schlage Button	6DPC = Six-Digit Programming Code
= Specific Number on Keypad	4DUC = Four-Digit User Code

Add a new user code

6DPC New 4DUC Reenter New 4DUC

Delete one existing or preset user code

6DPC Existing 4DUC Reenter Existing 4DUC

Change current or preset programming code

IMPORTANT: If you forget your new programming code, you will have to reset the lock.

6DPC New 6DPC Reenter New 6DPC

Enable/disable all user codes

1.Disable All User Codes: 6DPC

2.Enable All User Codes: 6DPC

Turn beeper on or off (preset is on)

NOTE: Lock will still beep when battery is low.

6DPC

Delete ALL user codes at once

IMPORTANT: This will delete all the user codes but not the programming code.

6DPC Reenter 6DPC

8