Schlage FE595 Delete a user code if user code is unknown, Ensure only you have codes to the lock

Enable/disable Turn Lock feature (BE365 ONLY) (preset is enabled)

NOTE: When Turn Lock feature is disabled, you must enter a valid user code to extend the bolt.

6DPC

Create a temporary code (house sitter, plumber, etc.)

1.Add New User Code:

6DPC New 4DUC Reenter New 4DUC

2.Give person his/her code, but keep a written copy for yourself.

3.When code is no longer needed, delete User Code:

6DPC Existing 4DUC Reenter 4DUC

Delete a user code if user code is unknown

IMPORTANT: This will delete ALL the user codes but not the programming code.

1. Delete ALL User Codes:

6DPC Reenter 6DPC

2.Add New User Code:

6DPC New 4DUC Reenter New 4DUC

3.Repeat step 2 until all User Codes are reentered.

Ensure only you have codes to the lock

1.Change Programming Code:

6DPC New 6DPC Reenter New 6DPC

2.Delete ALL User Codes:

6DPC Reenter 6DPC

3.Add New User Code:

6DPC New 4DUC Reenter New 4DUC

Restore ALL preset lock settings

IMPORTANT: Lock will be reset to the preset programming and user codes. All existing user codes and current programming code will be erased.

1.Disconnect the battery.

(For FE575, see page 3. For FE595, see page 5. For BE365, see page 7.)

2.Press and release .

3.Reconnect the battery and wait until is no longer lit.

4.Within 10 seconds, press and hold until lights green and the lock beeps.

9