Fortec FS-4200 Software Upgrade, Hot Key 5.1 Number, Up/Down Channel Change, Left/Right Volume+

4.3 Software Upgrade

Please input password which is 0000 when you want to do the operation us below.

Upgrade Mode: Press keys to select among All, Code,

Logo, Program List. The default option is All.

Press OK key at the start button to start checking serial port.

5.Hot Key 5.1 Number

Use the numeric keys (0-9)to input the number of the desired channel. If the inputted number is beyond the valid channel number, system will "Invalid number” and press OK key to close this message.

5.2 TV/RADIO

In normal mode, press TV/RADIO key to switch between TV mode and Radio mode.

5.3 Up/Down (Channel Change)

Press PR+, PR- keys to change the channel up or down. If in the all satellites group,

you can select channel in all searched channels. If in the specific satellite, only can select channel in the satellite group.

5.4 Left/Right (Volume+/-)
Press	keys to change the volume. Press		keys to decrease the volume by
step 1, while press		keys to add the volume by step1.
5.5 Mute
Press	key to close the volume. You can press		key once again to restore the
volume, or press		keys to open the volume.

5.6 Pause

During the viewing, you can press PAUSE key to stop the picture while the volume continues. You can play the picture by pressing PAUSE key once again.

5.7 OK

1. During the viewing or listening, press OK key to pop up the TV program list or the Radio program list.

2. Press PR+, PR- keys to select the channel up or down, and then press OK key to play this channel in full-screen.

3.Press keys to select the satellite.

4.Press MENU or EXIT key to close this window.

11