TV55
15
Running Cable
Under a Window:
1.Connect one end of the supplied RG6 coaxial cable to the “F”- connector output on the end of the TV55 and connect the other end to the 9 3/4" white flat cable.
Note: If the supplied RG6 Coaxial Cable is not long enough, you can purchase additional lengths of RG6 Coaxial Cable from the retailer you purchased the TV55 antenna from.
2.Run the white flat cable through an open window. Make sure that it runs under the window to ensure proper window closure See Fig 15.
Fig 15.
Run a coaxial cable (not supplied) from the inside end of the 93/4” white flat cable towards your television set and connect the coaxial cable to the supplied Power Injector on the terminal labeled “TO ANTENNA”.
Through a Wall:
If you do not use the supplied 9 3/4" white flat cable to run your coaxial cable through a window and instead choose to drill through an external wall, be careful to avoid contact with any power lines, telephone lines, cable TV lines or plumbing.
1.Connect one end of the supplied RG6 coaxial cable to the “F”- connector output on the end of the TV55.
Note: If the supplied RG6 Coaxial Cable is not long enough you can purchase additional lengths of RG6 Coaxial Cable from the retailer you purchased the antenna from.
2.Drill a hole in an exterior wall matching the diameter of the RG6 coaxial cable
3.Run the RG6 Coaxial Cable through the hole into the home. Note: Please see “Water Damage Prevention” for proper sealing of the hole.