Kathrein UFS 733si, UFS 733sw manual Video Settings

BOX SETTINGS

VIDEO SETTINGS

Also note the bars at the bottom of the on-screen display! These provide information on what to do next.

Usechanges.the  buttons to select the line you want to change. Use the  buttons to make the

Screen Format:

Select your TV's format here. Either 4:3 or 16:9/wide screen TV

Picture Scaling:

Select here how the picture from the channel provides is to be adjusted by the receiver if it does not match your setting (4:3 or 16:9).

For screen format 4:3: Either Letterbox 14:9, Letterbox 16:9 or Pan & Scan/CCO

For screen format 16:9: Always 16:9 or Automatic

HDMI Output:

If you receiver is connected to an HDTV using an HDMI cable, press the  button to make the settings. The following settings are then available (make the selection using the  button and the settings using the  buttons):

- Image resolution:	576i, 576p, 720p and 1080i
- Test of coloured bars:	Press the  button to perform a test of coloured bars (only output
	over HDMI)
- HDMI audio:	“On” (digital audio is transmitted over HDMI) or “Off” (digital audio is
	not transmitted over HDMI)
- Digital volume control:	“On” or “Off”

Press the  button to exit the “HDMI Output” sub-menu.

52