Kathrein UFS 733sw, UFS 733si manual First Installation Single-cable system automatic, Automatic

FIRST INSTALLATION: Single-cable system (automatic)

AUTOMATIC

You can only use the “Secure channel with PIN” function if this function is supported by the single-cable components used. In the case of Kathrein

single-cable components, this is currently only the case for the EXU 908.

Secure channel with PIN (only for on selection of “User defined” or “Kathrein EXU 908”):

Press the  button to switch to the “Secure channel with PIN” line. Here it is possible to protect the transmission frequency used by entering a PIN. No other receiver can then use that transmission frequency

unless the PIN is input. Select the setting “Yes” using the  buttons.

Password PIN (only for “Yes” setting in the “Secure channel with PIN” line):

Select the “Password PIN” line using the  button. You can now use the number buttons to enter a PIN (0-255).

Testing connection:

Use the  button to switch to the “Test connection” line and press the  button. The receiver now tests the settings you have made. The following message appears:

Select a spare transmission frequency using the  buttons and then confirm your selection using the  button. The following screen appears:

17