F R O N T P A N E L
FRONT & REAR PANEL
1 | 2 | 3 | 3 | 4 | 5 | 6 | 7 |
CATV SERIES
SET
MODE
+
–
.75MHz | MONITOR | 14 | 0 | 2 | 4 | 6 | 8 10 |
.50MHz |
| ||||||
|
|
|
|
|
| ||
.25MHz |
|
|
|
|
|
|
|
|
|
| SIGNAL STRENGTH |
1. MODE KEY:
The "MODE" key selects the audio mode: 6.8MHz preset or 5.0MHz to 8.MHz tunable.
2. SET KEY:
The "SET" key is for programming the video I.F. frequency and the audio
3. +/- Keys:
These keys are used for changing, up or down, the channels, I.F. frequency and audio modes.
4. SEVEN SEGMENT DISPLAY:
The display indicates the channel number. I.F. frequency and audio for both
5. LED's:
The LED's indicate changes in the I.F. frequency in 250KHz increments.
6. MONITOR:
Thefrontpanel"F"connectorprovidesaclamped video output.
7. SIGNAL STRENGTH:
The meter provides a relative measure of RF input to the receiver.
Channel I.F. |
| Channel I.F. |
| ||||
Display | MHz | MHz | MHz | Display | MHz | MHz | MHz |
1 | 1430 | 3720 | 12180 | 13 | 1190 | 3960 | 11940 |
2 | 1410 | 3740 | 12160 | 14 | 1170 | 3980 | 11920 |
3 | 1390 | 3760 | 12140 | 15 | 1150 | 4000 | 11900 |
4 | 1370 | 3780 | 12120 | 16 | 1130 | 4020 | 11880 |
5 | 1350 | 3800 | 12100 | 17 | 1110 | 4040 | 11860 |
6 | 1330 | 3820 | 12080 | 18 | 1090 | 4060 | 11840 |
7 | 1310 | 3840 | 12060 | 19 | 1070 | 4080 | 11820 |
8 | 1290 | 3860 | 12040 | 20 | 1050 | 4100 | 11800 |
9 | 1270 | 3880 | 12020 | 21 | 1030 | 4120 | 11780 |
10 | 1250 | 3900 | 12000 | 22 | 1010 | 4140 | 11760 |
11 | 1230 | 3920 | 11980 | 23 | 990 | 4160 | 11740 |
12 | 1210 | 3940 | 11960 | 24 | 970 | 4180 | 11720 |
5
PICO MACOM INC. 12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818)